Thursday, February 28, 2013

St. Patrick's Day - Treat Box

Luck O' the Irish! I have an opportunity to advertise on a FB page for our local community. I'm going to offer these treat boxes. I mentioned, in my youtube video, these are for my friend who is a teacher as well.

Supplies:
Plantin School Book Cricut cartridge
Simply Charmed Cricut cartridge
Designer's Calendar Cricut cartridge
Design Blocks Plaid stamp
StazOn Forest Green Ink
Black and White Colorbok card stock
Inkadinkado Blending Chalk
Coordinations orange, green, yellow, green glitter card stock
Skin Tone card stock

Chocolate Coins

The box was cut at 10 inches
The leprechaun cut at 3 inches
The four leaf clover was cut at 1 inch

Here's how I did it:




Just A Scrappin Design Team Challenge - Teddy Bears

Hi all! Have you ever had a moment where your creative juices weren't quite flowin'? Well, for this challenge that was simply the case. I started with the idea in my head and just had the most difficult time putting it all together. Hey, but I didn't give up! I will punch a hole on the left and right side at the top and pull some ribbon through it. It'll hang on my door very nicely.

Supplies:
12 x 12 Chip board (Joanns)
12 x 12 White Colorbok card stock
Coordinations card stock in green, yellow/gold and orange
Gold foil paper
Green glitter paper (Coordinations)
White Gel Pen
Green glitter
Glue pen
Cricut Cartridges: Teddy Bear Parade, Simply Charming, Designer's Calendar, Elegant Edges, Create A Critter 2
Ribbon: crinkle ribbon
Glubers: Cool stuff that I'm going to try and do a tutorial on. This was for the rolled flowers. I couldn't figure out where to put an quilling embellishments so I did the rolled flowers.

First, I glued the white card stock onto the chip board. I cut the black frame edges from Elegant  Edges (pg 43). I used my Gypsy to cut this at 11.65 x 1.00.
All the Teddy Bear pieces were cut at 10 inches. On the eyes I used a white gel pen as well as the pant legs, bow tie and boots. I hand traced the lapel of the jacket and manually cut it. Otherwise it would have been green and blended in. That's just how the cartridge is. I used a glue pen around the edges of the lapel and added Martha Stewart glitter.
I cut the out the pot and rainbow at 3 inches (pg. 33) of Simply Charmed then cut the rainbow stripes. Layer 1 in yellow/gold, then two cuts of layer 2 in green and one in orange. This was the first time I'd made this cute little pot. It was a little confusing at first. The "lucky" word was cut out at one inch from Simply Charming (pg. 32). I used a black gel pen to add the face.
I used a small circle punch for the gold that's in the pot. They are made of gold foil paper.
The four leaf clover on his nose (cut at 1 inch) and the one under the "Happy St. Patricks Day" (cut at 3 inches) was from green glitter card stock. I used Designer's Calendar.
The "Happy St. Patricks Day" was cut at 2 inches. It's from the Create A Critter 2 cartridge. First I cut the Phrase in black then the "St. Patricks" in green.
I placed the four rolled flowers on each of the corners. I have a BUNCH of ribbon but believe it or not did not have a bright green that went well the the color scheme.
All in all it turned out cute. 
If you have any questions just leave a comment and thanks so much for stopping by!
Hugs,
Kimberly


Wednesday, February 27, 2013

Cardz TV Crafty Cards Challenge #126 - Make A Wish

Hi all! I'm having so much fun entering my creations in Mary's Cardz TV blog (cardztv.blogspot.com). I really love her stamps and hopefully will win one this time.



 
 
Supplies:
Recollections pre-scored card stock 5 1/2 x 4.
DCWV Brown Shimmer cut at 5 1/2 x 4
DCWV The Sweet Stack
Recollections Yellow and Green paper
White Gel Pen
Quilling Paper
Recollections Bling
Ofray Ribbon
Cricut Cartridge Celebrations
Stamp Set (?)
 
The pre-scored Recollections card stock really comes in handy. I cut the DCWV brown shimmer the same size. Then I cut the DCWV Sweet Stack at 5 1/4 x 3 3/4 and layered that on top of the brown.
I cut a piece of pink ribbon (from my stash) and green with white dot ribbon (Offray) about 4 1/2 inches long and wrapped it around the DCWV Sweet Stack right near the top. The lable comes from Lacey Lables Cricut cartridge cut at 2 inches with a yellow base then a pink layer. I stamped "Happy Birthday" using a stamp set from Fiskars (?). I have the stamp for a long time. The cupcake was cut at 3 inches in green as the cupcake bottom and yellow as the cupcake frosting. I added square pink bling and used my quilling technique (roll) to make the faux chocolate chips. The cherry is red quilling paper using the roll technique but a bit bigger. I wrapped the same green with white polk a dots ribbon around the bottom of the cupcake and faux stitched it.
 
Thanks for stopping by!
Hugs,
Kimberly




Monday, February 25, 2013

My Craft Spot - Monday Challenge #88 Pop It Up

Another Monday Challenge~This one is for My Craft Spot (mycraftspotkimberly.blogspot.com).
"Pot It Up"





I used a few techniques on this one. Thank you so much for stopping by!

Card Base: Bazzill cut at 5 1/2 x 4 1/4
Layer 1: Brown DCWV Shimmer cut at 5 1/4 x 4
Layer 2: Pink DCWV Shimmer cut at 5 x 3 3/4
Flowers: I found 1/2 of a yard in the Walmart remnants in this adorable pick, green, white decorative flowers. I Mod Podged about a 10 x 10 inch piece and let it dry for a couple of hours. After it dried, I cut out the flowers. I used the large circle Recollections pop dots on all the pedals to make them pop up off the card.
Embossing: I used a Cuttlebug edge embossing folder. 
Ribbon: American Crafts. 
Stamp: Avocado Arts (avocadoarts.com)

Hugs,
Kimberly

Fantabulous Cricut Challenge-Challenge Me Monday #150 Fun with Puns

Monday challenges are always so much fun! For Fantabulous Cricut Challenge it is :
"Include a funny title or phrase on your project."

Sorry about the picture quality...

Supplies:
Card Base: Recollections White (5 1/2 x 4)
Embossed Heart Layer: Purchased at Joanns Craft Store last year. This was a scrap....love to use up my scraps.
Cricut Cartridge: "Just Because" Cards on page 34. I cut the pot out on craft card stock (layer 3 shadow) at 3 inches then dry embossed it with my Cuttlebug Swiss Dot folder. I cut the heart paper (s>layer 1) out of a scrap heart designed paper then used one of the hearts for the top of the coffee pot. The sentiment "Love You A Latte" was cut at 1 1/2 inches. First in craft card stock (word) then in pink card stock (s>word). I used my white Gel pen to make the faux stitching.
Have a sun shiny day!
Kimberly

Thursday, February 21, 2013

Just-A-Scrappin Design Team Challenge - Happy Birthday Patti

It's Patti's birthday! This card is for my Just-A-Scrappin design team buddy. She likes blue and bling so here's what I've come up with. I do like her color choice and I've added a bit of yellow. Thanks all for stopping by!

Card Base: 5 1/2 x 4 1/4 white Colorbok (Walmart) cut so that the card opens verticle.
Blue Layer: 5 1/4 x 4 Blue/light blue Coordinations (JoAnns). I sanded it with my Tim Holtz sanding tool.
Embossing Folder: Spellbinders Impressabilities "Butterfly". This is a unique embossing technique. It's not a folder. It's a metal sheet.
Embellishments: string of pearl, white hem tape, and flowers from Recollections.
Stamp: Avocado Arts (www.avocadoarts.com)
Bling: Recollections

Monday, February 18, 2013

Mini Scrapbook Album - Friendship

I've made a mini scrapbook album for my best friend. Her birthday is just around the corner. Although making a mini is time consuming I really enjoy making them. Let me know if you have any questions about how or what I did on the pages.

Have a great day and thanks for stopping by. 
Hugs,
Kimberly

Friday, February 15, 2013

Thank You Card

I made this card for a sweet friend of mine who, the other day, made us breakfast. Homemade corn bread blueberry muffins and a delicious veggie omelet. I used a new Fiskars ribbon punch and a masking technique. The video I made for my youtube channel (youtube.com/sunshinecreation) was too long and got cut off so, I'm posting a picture of it. Oh and the picture shows the ribbon color change.
Thanks for stopping by!

Supplies:
DCWV Jewel 5 1/2 x 4 1/4 card base in lavendar. Colorbok white textured cut at 5 1/4 x 4
Fiskars Flower ribbon punch.
Spellbinders Flower Stamp and Die Cuts (I used the stamp only)
Sentiment and Leaves Stamp: Unknown
Ribbon: Offray Lavendar and Green

Monday, February 11, 2013

Fantabulous Cricut Challenge Blog - Challenge Me Monday "Be My Valentine"

Good Monday Morning Blogger friends! FCCB has given us a challenge today "Be My Valentine". Are you surprised that I've used the Teddy Bear Parade Cricut cartridge?

Supplies:
Card Base: Bazzill Red 5 1/2 x 4 1/4
Layer: Recollections "love" from their 6 x 6 paper pack.
Teddy Bear: Teddy Bear Parade Cricut cartridge cut at 3 1/2 inches
Heart: Doodlecharms cut at 1 1/2 inches
Twine: Recollections
I used my white gel pen to put the stitches on his fisherman's jacket, writing on the heart and stitching on that as well.
I hand cut the banner using red and white then (Avocado Arts) stamped "Happy Valentine's Day" with red Staz On ink.

Hope you have a fabulous day!

Hugs,
Kimberly


Thursday, February 7, 2013

Just-A-Scrappin Design Team Challenge - Love Is In The Air

This week, for the Just-A-Scrappin Design Team challenge is "Love is in the Air. Use lots of hearts". I'm "killing two birds with one stone" here. I was inspired to create this card not only for the design team challenge but Card Maker magazine (CMM) also has monthly challenges as well. Now, CMM was challenging the readers to do a card with Octagons on it...huh? Out of the...cough...cough...many (we'll just say "many") Cricut cartridges I have NOT ONE had an octagon cut. I could only find it on George Basic Shapes, which surprising enough, I do not have. So, I got out my graph paper and cut my own.
The card base is from Recollections in which I layered it with a pre-embossed paper that I had bought at JoAnns last year. It was a scrap so I don't know the manufacturer. I cut a 3 x 5  1/2 inch strip of white paper and punched it down both sides. I then used my hand made octagon and traced it on pink card stock then on some Martha Steward heart designed paper. I found the most adorable heart embellishments at Walmart and put several of them on each of the Octagons. I like the Live, Love, Laugh sentiment. It's a stamp set I've had for a long time and have almost worn it out.



Wednesday, February 6, 2013

Valentine's Day Cards - Wrapping It Up

Hi all!
Well, I think I'm done with creating my Valentine's Cards and wanted to show you all that I've done. I did get a call from the owner of the store I used to sell my cards and he's asked I bring them back. He said, "People have been asking where the cards are". That is sure an ego booster, right?
I'll list them individually and if you have any questions just leave and comment and I'll get back to you.
Hugs,
Kimberly


 

Friday, February 1, 2013

Winner of the Valentine's Day Giveaway! Judy Ashmore

Congratulations Judy Ashmore! Random.org has chosen you as the winner for the Valentine's Day Themed Giveaway! Contact me as soon as you can so I send these items off to you! Thank you all for participating in my first Giveaway!